Contact Us Tel: +65 9190 1942    |    Email:
Follow on facebookollow us or stay in Follow on twitterouch


JAP Release new AV Pro 2g+ TX & RX

2G+AVPro is the newest model of HD over IP transmitter and receiver, which have added audio features that the 2G and 2G+ generations do not. The tran

Luxul Get's Some Mojo

As of today we are proud to partner with Luxul , distributing thier networking products through out Asia and India  Luxul is a leading innovator

Metageek Launches Chanalyzer 5 !

Chanalyzer 5 shows you the signal strength and RF activity of co-channel networks, overlapping channel networks, and non-Wi-Fi transmitters on each Wi

Mersive gets some Mojo !

Mersive and Mojoworx Form Sales Partnership that Extends Mersive’s Global Reach in Asia and India. Mersive a leading provider of visual computi

2G+ Rackmount Transmitter -3 input


How an HD/IP Matrix Works

The key element within the system is the Managed Ethernet switch setup; this is an essential requirement to create an HDMI over IP matrix with source switching. It is important to understand that the HDMI over IP devices themselves are not capable of performing any switching functions, the units function on the LAN as simple plug and play devices. It is the configuration adjustments of the Managed Ethernet switch that performs the switching operation between sources.

Source Transmitters use virtual local area networks (VLANs) set up on the Managed Ethernet Switch to create HDMI audio and video streams. Each Transmitter has its own VLAN creating a number of individual networks on the switch, each with a HDMI “channel” created on them. Display Receivers attached to a port on the Managed Ethernet switch can be connected to any chosen VLAN to display that particular HDMI channel.

For example, you could have a Satellite TV box on one VLAN, a Blu-ray player on another VLAN, a HD Games Console on another, and so on. It is possible to control which VLAN a Display Receiver views by adjusting the port configuration of the Managed Ethernet Switch. This sounds complicated, but it’s made easy with RS232 and IP drivers available for practically any automation system on the market.


The HD over IP Rackmount Transmitter allows you to simultaneously send out 3 HD Signals (up to 1080p) to one or more HD video projectors or LCD Panels .


2G+ Additional Features and Functions


•  HDMI Pass-through on Transmitter

•  USB over IP for Touch Screens / KBM / Joysticks

•  Audio Extraction - 3.5mm Stereo

•  Programmable Audio Delay via HTTP Interface

•  Manual Audio Delay via Buttons on Bottom

•  RS232 now on 3.5mm interface 

•  Integrated Null Modem

•  Locking HDMI Cables supported

•  Compatible with Standard 2G Models (mix/match)

•  Independent CEC over IP CPU on board